How do I set up/assemble the KILN?

Remove all packaging and recycle as per your local government laws. Place the KILN on the Pizza Station or similar benchtop. Insert the front stone, then the round stone.

For KILN R Series: To install the batteries, open the battery compartment cover. Load a set of 4 new AA type batteries into the battery box, ensuring the plus (+) and minus (-) ends are in the correct position, then refit the cover. Alternatively, connect the KILN to mains power. Unscrew the pulse igniter cap to fit one new AA type battery, ensuring the plus (+) and minus (-) ends are in the correct position, then refit the cap. Close the battery compartment cover.

Make sure the burner knobs are turned off, then connect the gas hose to the KILN. The KILN can only be used in an above-ground open-air environment with natural ventilation. DO NOT use the KILN indoors.

What surface can I place the KILN on?

We recommend placing your KILN on a heat-resistant surface, such as metal or stone. We highly recommend NOT placing your KILN on glass, plastic, or fabrics e.g. tablecloths

How do I store and maintain my KILN?

After each use, ensure you thoroughly clean your KILN. After the unit has cooled down and been cleaned, place the protective cover on the KILN. We recommend storing the KILN under cover, away from harsh weather environments to increase longevity. When not using the KILN for an extended period of time, ensure you occasionally wipe the internals and externals clean to prevent dust build-up

Will the cover keep the KILN dry? 

The cover is made from heavy-duty water-resistant material, designed to protect your KILN from the elements. Please keep in a dust free environment

How do I ignite my KILN?

Prior to cooking for the first time, turn the main burner on high for 30 minutes, then turn off and let the oven cool down. Once cool, use a paper towel to wipe away any soot inside. Be careful, the oven may still be hot in some places.

Push the main burner knob in and slowly turn it anti-clockwise until you hear it click (8-10 seconds). Hold in for another 10 seconds after ignition, then release. Set the burner to your desired position. 

For KILN R Series, repeat with boost burner knob and press the button to activate the rotating turntable.

If the burners do not ignite, leave the knobs at OFF and wait 5 minutes before trying again.

Once ignited, leave on high for approximately 10 minutes to heat the stone.

The KILN is ready to use once it has reached your desired temperature. Check this by pointing a temperature gun at the centre of the stone inside the KILN. Turn the main burner knob halfway, then begin cooking

WARNING: For KILN R Series, do not leave the boost burner activated for an extended period of time without the turntable running, as it may damage the stone

What kind of gas tank should I use with the KILN?

Refer to your instruction manual that was supplied in your box or contact your local dealer

Can I use butane and/or natural gas? 

Refer to your instruction manual that was supplied in your box or contact your local dealer

How much gas will the KILN use?

Refer to your instruction manual that was supplied in your box or contact your local dealer

How do I clean the KILN? 

Before cleaning, ensure the KILN and stones have cooled and are safe to touch. We recommend testing cleaning materials on a small section of the KILN first.

Clean the outside of the KILN with mild detergent and a clean cloth. Dry with a clean cloth. Clean the inside of the KILN with soapy water and a sponge or mild scourer. For hard-to-clean areas, use a small amount of baking soda on a wet sponge. Dry with a clean cloth, then refit the stones.

Place the protective cover on the KILN when it’s not in use.

How do I clean the burners/ignition? 

Use a soft bristle type brush to clean the burner and ignition

Are the stones dishwasher safe? 

No, the stones are not dishwasher safe.

How do I clean the stones? 

Before removing and cleaning, ensure the stones have cooled and are safe to touch. Carefully remove the stones from the KILN. Using the Pizza Oven Brush or similar, brush and scrape away particles. Wipe clean with water and a cleaning brush or sponge, then thoroughly dry with a clean cloth.

USE CAUTION - stones can retain heat for many hours after cooking. Do NOT submerge the stone in water

What is the cooking size? 

The KILN can cook a 16" pizza and can fit various bakeware and cookware. The mouth of the KILN is 92mm high, we recommend not using bakeware and cookware higher than 75mm

Are any accessories included? 

No, accessories are sold separately.

What batteries does the KILN take? 

KILN R Series: 5 x AA batteries - 1 x for ignition and 4 x for turntable

How can I stop the oven from overheating?

Turn it down. Running the appliance for an extended period of time with the main burner on the high setting could result in damage to your appliance

What do I do if the burners won't ignite?

Check to see if; the cylinder valve is on, the cylinder is full of gas, the battery is correctly placed in the ignition slot, and the batteries are fully charged. Please contact your local service centre/dealer if all of the above are ok

Will the KILN change over time?

The appearance of the KILN will change over a period of time, depending on the current climate conditions, usage of the oven and how well it has been maintained by the user

The KILN has an uneven flame?

Turn off burner, allow to cool and re-ignite. If you still have an uneven flame, please contact us.

The KILN isn't getting hot enough or has an underpowered flame?

Check your gas bottle and connection. Follow the ignition procedure in the instruction manual. If you continue to have this issue please contact us.

The flame is cutting out?

Check your gas bottle and connection. What are the current weather conditions? If windy, this may affect your flame cutting out. Follow the ignition procedure in the instruction manual. If you continue to have this issue, please contact us.

The KILN is producing lots of smoke/soot?

There will be a small amount of smoke/soot as this is a natural part of the burning process

The KILN R Series turntable isn't turning?

Check that the power cord from the power adaptor is connected correctly and that the power is on at the main power board.

Check if batteries are fitted and are properly installed in the battery compartment. Check if batteries are full of charge and replace if needed. If you have any further issues please contact us.

Where can I find the serial number on my KILN?

The serial number is found on the data label which is either located underneath the appliance or in the battery compartment. It can also be found on your carton packaging

What is the warranty on the KILN?

Check your instruction manual or contact your local dealer for further details

Where can I find the serial number on my Pizza Station?

The serial number can be found with instruction manual or on the inside of the back panel

What safety devices are installed in the KILN?

Flame Safeguard System - The gas valve on this appliance has a flame safeguard built in for added safety when gas flow is stopped in the event the flame is extinguished with out the using the control knobs

Can I use my KILN in adverse weather?

We don’t recommend using the KILN in adverse weather conditions, and suggest reviewing your local forecast before cooking

How long does it take for the KILN to cool down?

The KILN and pizza stones may take up to 2 hours to fully cool down

What are some tips to ensure the KILN is used safely?

- Wear heatproof gloves when handling hot dishes
- Use caution when inserting & removing dishes from the KILN.
- Avoid contacting the front fascia surface as minor scratches may occur
- Use caution with the stones - they can retain heat for many hours after cooking. Do NOT submerge the stone in water.

All warranty information can be found on the Worldwide Appliances registration website. Follow the link to register your product for warranty now.

Customer Support:

0418 883 262

customercare@wwa.com.au

How do I assemble the pizza station?

Please refer to the instruction manual

Can I use the Pizza Station straight away?

Please wash the stainless-steel benchtop with a small amount of soap and warm water before using for the first time. Don’t forget to sanitise the surface area before use

How do I clean, store & maintain the Pizza Station?

Remove any waste, then wipe all surfaces clean with warm soapy water. The removable trays are dishwasher-safe. Wipe away any excess soapy water and dry all surfaces with a clean cloth.

Sanitise the unit to ensure it is food-safe. Let it air-dry, or wipe away any excess sanitiser with a clean cloth.

After cleaning and when not in use, place the protective cover on the Pizza Station. The Pizza Station must be stored under cover, away from harsh weather environments to increase longevity.

When not using the Pizza Station for an extended period of time, ensure you occasionally wipe it down to prevent dust build-up

What can I use the Pizza Station for?

It can be used with most portable pizza ovens, as a preparation station for the Everdure KILN, or as a standalone preparation station

What is the maximum weight for the stainless-steel benchtop?

The maximum weight that should be placed on the stainless-steel benchtop is 70kg/150lbs

Can I move the Pizza Station once set up?

Yes. When moving the Pizza Station, secure any items placed on top to prevent damage or personal injury

How do I store my Pizza Station?

When not in use, it can be stored outdoors but MUST be under-cover and covered (preferably with the Everdure protective cover). Ensure all surfaces are clean and dry before storing away

Pizza Station Manual