INSTALLING THE PIZZA OVEN UNDER A ROOF:

Do I need to extend the flue through the roof?

You may not need to extend/divert the flue or install a flue roof kit If the pizza oven is located in a well ventilated outdoor area with open sides and a high roof. There may be no issues if the outdoor area under the roof is well ventilated. We suggest that you initially install the pizza oven and use the oven a couple of times to determine the smoke output. If smoke is an issue you can use 45o degree bends and extensions to divert the flue out of the area past the roof or nstall a flue system through the roof.

We recommend that you can contact your local fireplace shop or flue chimney supplier for Flues and Triple Skin Insulated Flue Roof Kits. We highly recommend that the flue is installed by an experienced, qualified flue chimney installer (licensed plumber or builder) to meet Aus. Standard AS291.

You may need a double or “Triple Skin Insulated 4 x metre Flue Kit” to meet Aus Standard AS2918 if the flue is going through an insulated roof or within 25mm of combustible materials (e.g., plaster, timber frames etc).

If your flue chimney is not going through a roof, you may only require “Single Skin” extra lengths of flue pipe (and bends) to extend or divert the flue.

If you need further assistance and advice feel free to email us info@pizzaovensrus.com.au
with the oven model, photos/details and dimensions of the proposed installation
location, the ceiling height measurements and external roof photos (tiles, colorbond etc). 

STAINLESS
STEEL OR BLACK FLUES:

The stainless steel flue pipes can be spray painted black easily with Stove Bright Black Fireplace Heatproof spray paint.

Subito Cotto 60
• 100 mm flue pipe: 4 inch flue kit
Subito Cotto 80 and 100
• 125mm flue pipe: 5 inch flue kit
RUSLite 80 & 100
• 140mm flue pipe: use a smaller 5 inch flue kit is 125mm and fill the gap/seal with fibreglass tape/rope.
RUS70 Plain Arch and Brick Arch
• 150mm flue pipe: 6 inch flue kit
Tuscan
• 180mm flue pipe with oven: downsize to 6 inch at 150mm flue kit
Calabrian & Piemonte
• 200mm flue pipe: 8 inch flue kit
ZRW & Z1100
ZRW: 115mm flue pipe: 4.5 inch flue kit
Z1100 (and DIY Kit): 150mm flue pipe: 6 inch flue kit
Giotto
• 200mm flue pipe: 8 inch flue kit
Alfa 4 Pizze, Alfa 5 Minuti & Alfa Ciao, Alfa Brio
• 150mm flue pipe: 6 inch flue kit
Alfa One Nano
• 130mm flue pipe: use a smaller 5 inch flue kit is 125mm and fill the gap/seal with fibreglass tape/rope.
Alfa Allegro
• 180mm flue pipe: downsize to 150mm = 6 inch flue kit
Fontana Ovens – Marinara, Mangiafuoco and Margherita
• 140mm flue pipe: use a smaller 5 inch flue kit at 125mm and fill the gap/seal with fibreglass tape/rope.
Clementi Ovens 100, 80, 60
• 130mm flue pipe: use a smaller 5 inch flue kit is 125mm and fill the gap/seal with fibreglass tape/rope.
Maximus Arena Black (small)
• 127mm flue pipe: use a smaller 5 inch flue kit is 125mm and fill the gap/seal with fibreglass tape/rope
Maximus Prime XL
• 150mm flue pipe: 6 inch flue kit
Traditional Ovens Lisboa etc
• 140mm flue pipe: use a smaller 5 inch flue kit is 125mm and fill the gap/seal with fibreglass tape/rope). Or custom order a 5 up to 6 inch “reducer” to convert to a bigger 6 inch 150mm flue kit

APCODE A
    Faqs